This post is brought to you by green apple solutions.
A water leak is something that should always be solved quickly. It is estimated that almost 40% of water consumption is from wasteful of leaks, and in need of a leak repair urgently. As we all know, water is not a resource that can be just thrown away. A water leak can be a big problem for a home. Even when we do not realize it, a leak can waste thousands of liters of water and at the end of the month, this waste is very expensive. A faucet leaking a few drops per second can cost almost a thousand dollars at the end of the month, and a leak repair is the only way out.
The most difficult thing is to determine whether there is a leak in a residence or not because most leaks happen in hidden corners. People usually only find out when the value of the water bill increases. Therefore, it is necessary to perform some tests to see if there is a leak.
How To Know If There Is A Leak In The Plumbing
The simplest way to determine if there is a leak in plumbing is to close all the taps and see if some kind of measure is recorded. If this happens, most likely there is a leak. It is also possible to differentiate whether the leak is in the plumbing connected directly on the street or if it is in the plumbing of your water tank. Find the top rated tankless toilets.
To find out if the leak is in the street plumbing, just close the register and place a full glass of water on the faucet directly attached to the street and further away from the register (usually the laundry room). If the tap sucks the water then there is a leak in the tubing. With the water box, it is simply a matter of observation. Simply close the register, dial the current water level and wait up to 2 hours without using the taps or the discharge. After this time, observe if the water level has decreased. If so, there is a leak.
Now the problem begins. If the leak is in a pipe, it is probably hidden and this is bad enough to determine the exact location of the leak. Nevertheless, there are various equipment and methods to locate leaks in the plumbing in a practical and fast way. However, it is possible to identify the location of the leak by observing changes in the walls and grounds. These are some of the indicators that there is a water leak in the plumbing. In toilet bowls, the best solution is to throw cigarette ash or coffee powder into the basin water. If the ash or dust does not settle to the bottom, the leak is in the toilet.
How To Fix The Water Leak
Luckily the hardest part of a water leak is finding where it is. After that, the solution is easy, fast and definitive.
If the leak is on a faucet (the infamous drip-drip) the solution is to maintain faucet repair, and this should be the only leak repair you need. To solve this problem, disassemble the faucet and check the conditions of the rubber sealing. If it does not have a defect, only a quick clean can solve the problem. If it needs changing, make the change and the leak will stop. In the case of toilets with a coupled box, simply resetting the exhaust valve is enough to end the problem of leakage. In hydra valves, the adjustment should be done by a professional plumber who is experienced in this type of device.
Repairing Water Leakage In Pipes
In the case of cracked pipes, it is possible to end the leak by replacing the defective area or by purchasing a leak-tightening kit, easily found in building material stores. This kit is made with glass resin or plastic glue capable of sealing the leak completely. Apply the product according to the manufacturer’s specifications to perform the leak repair.
If the barrel is broken, the best option is to replace the defective part. This can be done in a simple way:
- Cut off the defective pipe. Try to cut a large piece of about 10 to 15 centimeters.
- Cut a piece of pipe the size of which will be dispensed. Cut it a few inches less to compensate for the size of the running gloves.
- Use two sliding gloves for the weldable tube. Then “hook” the new piece into the old pipe.
- Put it in the pipes and gloves and carefully fit it to avoid breakage and damage.
By now, your leak repair should be successful and if not, consult a professional plumber.